9) CHECK THAT THE INJECTORS ARE PROPERLY LOCATED, THAT THE
WATER SPREAD FORMED BY THE INJECTORS ARE UNIFORM AND THAT
ALL OF THEM ARE EQUAL. If possible, disassemble, clean and place in the
correct position.
Ice storage bin cleaning.
1) Disconnect the machine, close the water and empty the ice-cube storage bin.
2) Use a dish cloth with detergent.
3) In case the white lime spots remain, rub them with a soft antilime, wait a few
minutes and use again a dish cloth. Clear with water, dry and start the machine
again.
Exterior Cleaning
Use the same procedure as the one indicated for the ice storage bin.
Collectors and Injectors
1) Remove the shield. (Take the time to clean it with phosphoric acid, clean with
bleach and clear under water).
2) Remove the louver of ice drop. (Clean as done with the shield).
3) PULL THE COLLECTOR UPWARDS. IT IS PRESSURE MOUNTED.
4) Disassemble the injectors and lids, and clean them.
5) Disassemble and clean the main head filter. (IT IS PRESSURE MOUNTED).
6) Assemble the filter, injectors and collector.
CAUTION
IT IS REALLY IMPORTANT THAT WHEN PLACING AGAIN THE COLLECTOR
THE INJECTORS ARE COMPLETELY PERPENDICULAR TO THE SAME, IF IT
IS LEFT BLENDED THE ICE CUBES OF THE EDGES CAN BE LEFT WITHOUT
WATER.
