ITT Goulds Pumps VIS, Инструкции по установке, эксплуатации и обслуживанию

Страница: 31 / 32

8 Parts List
8.1 General
The requirement for a stock of spare parts shall vary with the severity of conditions of service, and the
extent of field maintenance anticipated, and the number of pumps installed. A minimum of one spare of
each rotating part should be stocked, as well as a complete set of bearings and seals.
8.2 Ordering Parts
When ordering spare and replacement parts the pump serial number, type and size of pump must be
given. Refer to nameplate. This is essential in order that Goulds Pumps may identify the pump and fur-
nish the correct replacement part. Give the name and item number of the part as listed in parts list with
the corresponding figure number and pump,
4.1 General Description on page 13 . Orders for replacement
parts should be sent to Sales Department, Goulds Pumps, Inc., Vertical Pump Division, City of Industry,
California.
8.3 Return Parts
All materials returned to factory must have a Return Material Order (RMO) tag attached. Consult
the nearest factory representative or Sales Office for shipping instructions and an RMO tag. Articles re-
turned should be carefully packed to prevent damage in handling.
PART NO. DESCRIPTION
649 Coupling
660 Pumpshaft
661 Bowl Disch.
670 Bowl lntmd.
671 Adapter SBM
672 Bearing lntmd.
673 Impeller
677 Taper Lock
680 Wear Ring-Bowl
690 Bearing-Suction/Disch.
692 Sand Collar
698 Screen Suction
Refer to 4.1 General Description on page 13 .
8 Parts List
VIS Installation, Operation and Maintenance Instructions 29