Getting started
Remove your television carefully
from the box. You may wish to
You can use an outdoor or indoor aerial.
However, if you use an indoor aerial the
quality of the reception may be reduced
and adjustment of the aerial may be
required when changing programs.
Please note
If you live in a poor reception area or
use an indoor aerial you may experience
loss or corruption of teletext
transmissions.
Switching on
Mains power
Connect the mains plug into the mains
socket and switch on.
Connect the TV mains plug into your domestic
mains socket outlet (230 V 50 Hz AC).
Please Note
When not in use disconnect the plug
from the mains power supply.
Press the
Power
button on
the front of the TV. The
standby indicator will
illuminate.
Blueback (optional):
When there
is no broadcast, the background
purely blue instead
of noisy picture.
Switching the TV on for the first time
To install your TV, please read the sections
“TV controls” and “ Tuning the television”.
Please Note
Do not leave the television in standby
unattended or overnight.
Battery fitting
Insert the 2 AAA batteries supplied into the
compartment on the rear of the remote
control, ensure you follow the polarity
diagram inside the compartment.
store the packaging for future use.
In the box
Inside the package you should have:
• Television
7
4
Read these instructions before use
Aerial connection
To connect an aerial, plug the aerial lead
into the aerial socket on the rear of the
TV.
Press a
Numeric
button or the
Program up
or
Program down
button on the remote control or
Program up
or
Program down
button on the front panel to
switch the TV on.
The standby indicator remains on.
The picture will appear after a
few seconds.
• AAA batteries x 2
Press the
Standby
button to switch
the TV to standby. The standby
indicator will light brighter.
• Remote control
• User guide
