ITT 42F-7275, Руководство пользователя

Страница: 59 / 68

55
English
Internet Portal
HINT:
A Broadband internet connection is required
for high quality viewing. You must set the Country
and Language data correctly in the
First Time
Installation
for proper operation of the internet
portal.
Ensure the TV is connected to a Wired/Wireless(if
available) network. After the connection is
established, you can view portal options.
Press
Internet
button on your remote control and
the portal application options will be displayed in
a manner similar to the template below.
Note on PIP Window
Current source content will be displayed on the PIP
window, if you switch to portal mode while on any
source.
If you switch to portal mode while watching TV
channels, current programme will be displayed on
the PIP window. You can change channels using
Pro/-
buttons.
Use the Left or Right, Up or Down buttons to navigate
between the items on Portal screen. Press the
OK
button to confirm your selection. Press the
Return/
Back
button to go to the previous screen.
Press the
Exit
button to quit the Internet portal mode.
Note:
Possible application dependent problems may
be caused by the content service provider.
Some applications might become disabled due to
changes made in the
Parental Settings .
HBBTV System
HbbTV (Hybrid Broadcast Broadband TV) is a
new industry standard that seamlessly combines
TV services delivered via broadcast with services
delivered via broadband and also enables access
to Internet only services for consumers using
connected TVs and set-top boxes. Services
delivered through HbbTV include traditional
broadcast TV channels, catch-up services,
video-on-demand, EPG, interactive advertising,
personalisation, voting, games, social networking
and other multimedia applications.
HbbTV applications are available on channels
where they are signalled by the broadcaster
(currently various channels on Astra broadcast
HbbTV applications). The broadcaster marks one
application as “autostart” and this one is started
by the platform automatically. The autostart
applications are generally launched with a small
red button icon to notify the user that there is an
HbbTV application on that channel Press the red
button to open the application page. After the page
is displayed you can go back to the initial red button
icon state by pressing the red button again. You can
toggle between the red button icon mode and full
UI mode of the application via pressing red button.
It should be noted that the red button switching
capability is provided by the application and some
application may behave differently.
If you switch to another channel while an HbbTV
application is active (either in red button icon mode
or full UI mode), the following scenarios can occur.
• The application can continue running.
• The application can be terminated.
• The application can be terminated and another
autostart red button application can be launched.
HbbTV allows the applications to be retrieved both
from broadband or broadcast. The broadcaster
may enable both ways or one of them. If the
platfrom does not have an operational broadband
connection, the platform can still launch applications
transmitted on broadcast.
The autostart red button applications generally
provide links to other applications. An example of
this is shown below. The user then can switch to
other applications by using the links provided. The
applications should provide a way to terminate
themselves, usually button 0 is used for this.