ITT 42F-7275, Руководство пользователя

Страница: 43 / 68

39
English
NOTE:
When connecting a
device via the YPbPr or Side AV
input, you must use connection
cables to enable connection.
See the illustrations on the
left side. | To enable PC audio,
you will need to use SIDE AV
CONNECTION cable’s WHITE
& RED inputs. | If an external
device is connected via the
SCART socket, the TV will
automatically switch to AV
mode.| When receiving DTV
channels (Mpeg4 H.264) or
while in Media Browser mode,
output will not be available via
the scart socket. | When using
the wall mounting kit (optional),
we recommend that you plug
all your cables into the back
of the TV before mounting on
the wall. | Insert or remove
the CI module only when the
TV is SWITCHED OFF. You
should refer to the module
instruction manual for details
of the settings. | Each USB input
of your TV supports devices up to
500mA. Connecting devices that
have current value above 500mA
may damage your TV.
Always connect a USB medium
directly to the USB port on the
TV. The use of a USB extension
cord is not supported by the
TV. The TV’s USB port cannot
communicate with a PC.
Connector Type Cables Device
Scart
Connection
(back)
VGA
Connection
(back)
SIDE AV PC/YPbPr
Audio
Connection
(side)
Side Audio/Video
Connection Cable
(Supplied)
PC Audio Cable
(Not supplied)
HDMI
Connection
(back)
SPDIFF
(Coaxial Out)
Connection
(back)
SIDE AV
Side AV
(Audio/Video)
Connection
(side)
Side AV Connection
Cable (supplied)
HEADPHONE
Headphone
Connection
(side)
YPBPR
YPbPr Video
Connection
(side)
YPbPr Connection
Cable
USB
Connection
(side)
CI
Connection
(side)
CAM
module
LAN
Ethernet
Connection
(back)
LAN / Ethernet Cable
Getting Started
Connections
If you want to connect a
device to the TV, make
sure that both the TV and
the device are turned off before
making any connection. After the
connection is done, you can turn
on the units and use them.