Itronix GoBook (IX250), Руководство пользователя

Страница: 43 / 153

29
Section 2. Getting Familiar with Your Computer
77-0100-001 12 September 2000
Changing your ‘swappable’ media bay device
1 Make sure the computer is not accessing the media bay drive.
2 Slide the door latches to release the media bay door.
3 Click the “Unplug or Eject” media bay icon on the right side of the taskbar.
4 Grasp the media bay device by the removal ribbon and pull straight out until it is clear from the slot.
5 Cick OK.
6 Re-insert the next media bay device by firmly pushing it back into the slot until it clicks into place.
Precautions for Handling CD-ROM/DVD-ROM Discs
Keep these precautions in mind when handling CD-ROM/DVD-ROM discs.
• Always hold the disc by the edges; avoid touching the surface of the disc.
• Use a clean, dry, cloth to remove dust, smudges, or fingerprints. Wipe from the center outward.
• Do not write on the surface of the disc.
• Extremes in temperature may damage discs. Store discs in a cool dry place.
• Do not use benzene, thinners, or cleaners with detergent. Only use CD-ROM/DVD-ROM cleaning kits.
• Do not bend or drop the discs.
• Do not place objects on top of discs.
CAUTION Do not insert any foreign objects into the disc tray. Do not force the tray to open or close manually.
When not in use, keep the tray closed to prevent dust or dirt from entering the drive unit. If you experience difficulty
when removing a CD/DVD disc, stretch a paper clip (or use a pin or a thin metal rod) and insert it into the emergency
eject hole located on the front panel.
The CD/DVD disk tray should eject immediately. This procedure can also be used to remove a CD/DVD from the
drive when the GoBook is powered off.