manualshive.com logo in svg

Itronix GoBook (IX250), Руководство пользователя, Страница: 124 / 153

Поделиться
Скачать
Itronix GoBook (IX250) Скачать руководство пользователя страница 124

110

GoBook™ User’s Manual

77-0100-001   12 September 2000

.…Display

The underlined, inverse, and hypertext characters are difficult to read on the screen

•

Change the color scheme. From the Start Menu select Settings, Control Panel, choose Display, and then click
the Appearance tab to make changes to the color scheme.

•

Make the online hypertext jumps black by adding the line JumpColor=0,0,0 to the [Windows Help] section of
WIN.INI.

I can’t see the cursor while using the DOS editor

•

Press FN+INSERT to change from insert mode to overwrite mode to enable a block cursor. When it defaults
to insert mode, the DOS editor uses an underline cursor which is less visible than the block cursor for over-
write mode.

The display appears to have random pixels darkened after scrolling

•

Contact your supervisor or your organization’s help desk for information about correcting this problem.

I changed my display resolution, but I see no difference on the screen

•

Try restarting your computer for the changes to take effect.

Содержание GoBook (IX250)


























































































































































Отзывы:

Нет отзывов