Itronix GoBook (IX250) Скачать руководство пользователя

Страница: 132 / 153

118

GoBook Users Manual

77-0100-001 12 September 2000

Miscellaneous

•

The battery contacts may be dirty. Turn off the computer, remove the battery, and clean the contacts.

The speaker volume is too high or too low

•

Increase the volume by pressing FN+F9; decrease the volume by pressing FN+F8.

The computer won’t turn on

•

The battery may not be installed properly, or it may not be fully charged. Make sure a fully charged battery is
properly installed.

•

Connect external power to charge the battery if it is not charged.

•

If you are using the AC adapter, check the electrical outlet you are using to make sure it is working properly.

•

If the GoBook computer does not turn on, restart the computer by holding down the power button for at least 5
seconds and then releasing the buttons.

The computer won’t turn off

•

Press and hold the Power button for 5 seconds.

If pressing and holding the Power button does not turn off your computer, the system may be locked up.
Reboot your computer by pressing CTRL+ALT+DEL.

Содержание GoBook (IX250)


























































































































































Результаты поиска

Содержание GoBook (IX250)

Отзывы:

Похожие инструкции для GoBook (IX250)

Бренды по названию

Популярные бренды

Itronix GoBook (IX250), Руководство пользователя

Результаты поиска

Содержание GoBook (IX250)

Отзывы:

Похожие инструкции для GoBook (IX250)

Бренды по названию

Популярные бренды