background image

Tip 7. Storing batteries 

z

Store the battery within the recommended temperature range: 10°C to 30°C (50°F to 86°F). 

z

Unused or stored batteries can lose power over time. When you install a battery that has not been 
used for awhile, connect external power to the computer and fully charge your battery. 

z

Battery calibration may increase the capacity of a battery stored for a period of time. For 
information on calibrating the battery, refer to 

Battery Calibration

.

z

It is recommended that the battery is recharged every six months while in storage. 

72_0119_001
28 June 2004

© 2004 Itronix Corporation.  All rights reserved.

Customizing Your BIOS Settings 

This chapter explains how to use the Setup 

Utility

 to modify the BIOS settings. The Setup Utility 

displays and allows modification of the GoBook III components and the configuration of devices that 
are connected to it. This information is used to test and initialize components at start-up time and to 
make sure everything runs properly when the system is operating. 

The GoBook III is configured with a set of default values. You may be able to increase system 
performance by changing some of the timing values in the Setup Utility, but this can be limited by the 
kind of 

hardware

 you are using. In certain circumstances, the system may generate an error message that 

asks you to make changes to the BIOS settings using the Setup Utility. This happens when the system 
finds an error during the POST (Power On Self Test) that it carries out at startup. 

CAUTION

  It is not recommended that you change any settings since this may cause the unit to not 

function properly.

If you are not sure how to configure the BIOS settings

 we suggest that you select Auto configuration 

with Optimal Settings on the Main Menu screen, then exit saving changes.  This loads optimized default 
settings for normal use. 

Using the Setup Utility 

The Setup

Utility

 allows you to configure your computer’s basic settings. When you turn your computer

GoBook III

®

 Help

Page 39 of 80

GoBook III Help

7/5/2004

file://C:\Documents%20and%20Settings\harwoodm.ITRXNT1\Local%20Settings\Temp\~h...

Содержание GoBook III




















































































Отзывы: