side of your computer, as you are facing the display, and is accessible by sliding the two bay door
latches, which release and open the door.
Inserting a CD-ROM or DVD-ROM Disk
1. Press the button on the front of the drive to open the disk tray and pull the tray open.
2. Place the disk on the tray, label side up.
3. Place the disk on the central spindle and press gently until the disk clicks into place.
4. Slide back the tray until it clicks shut.
Removing a CD-ROM or DVD-ROM Disk
1. Make sure the computer is not accessing the CD-ROM/DVD-ROM drive.
2. Press the button on the front of the drive and pull the tray all the way out.
3. Pick up the CD-DVD by the edges and remove the CD-ROM/DVD-ROM from the tray. Push the
tray into the computer until it closes fully.
CAUTION
When the computer is reading from a CD-ROM/DVD-ROM or Floppy disk drive, the
indicator light for the drive will flash. Do not attempt to remove a disk while this light is active.
Changing your 'swappable' media bay device
1. Make sure the computer is not accessing
the media bay drive.
2. Slide the door latches to release the media
bay door.
3. Left click the "unplug or eject" media bay
icon on the right side of the taskbar.
4. Select the media bay device and left click
to stop the device.
5. Wait for the "safe to remove hardware"
message.
6. Grasp the media bay device by the
removal tab and pull straight out until it is
clear from the slot.
7. Click OK
8. Re-insert the next media bay device by firmly pushing it back into the slot until it clicks into
place.
Page 21 of 80
GoBook III Help
7/5/2004
file://C:\Documents%20and%20Settings\harwoodm.ITRXNT1\Local%20Settings\Temp\~h...