ii
5
．
Environment
This series network camera should be installed in a cool, dry place away from
direct sunlight, inflammable, explosive substances and etc.
Please keep it away from the electromagnetic radiation object and
environment.
Please make sure the CCD (CMOS) component is out of the radiation of the
laser beam device. Otherwise it may result in CCD (CMOS) optical
component damage.
Please keep the sound ventilation.
Do not allow the water and other liquid falling into the camera.
Thunder-proof device is recommended to be adopted to better prevent
thunder.
The grounding holes of the product are recommended to be grounded to
further enhance the reliability of the camera.
6. Daily Maintenance
Please shut down the device and then unplug the power cable before you
begin daily maintenance work.
Do not touch the CCD (CMOS) optic component. You can use the blower to
clean the dust on the lens surface.
Always use the dry soft cloth to clean the device. If there is too much dust,
please use the water to dilute the mild detergent first and then use it to clean
the device. Finally use the dry cloth to clean the device.
Please put the dustproof cap to protect the CCD (CMOS) component when
you do not use the camera.
Dome enclosure is the optical component, do not touch the enclosure when
you are installing the device or clean the enclosure when you are doing
maintenance work.
7. Accessories
Be sure to use all the accessories recommended by manufacturer.
Before installation, please open the package and check all the components
are included.
Contact your local retailer ASAP if something is broken in your package.
Accessory Name
Amount
Network Camera
1
Quick Start Guide
1
Installation Accessories Bag 1
CD
1
