Installing the 100W-R and 100WP-R ERT Modules
TDC-0951-005 100W-R and 100WP-R Datalogging ERT Module Installation Guide
16
Proprietary and Confidential
3.
Align the ERT module backplate with the mounting screw holes. Verify the Itron logo and arrow point up.
4.
Insert a backplate mounting screw in one corner and tighten two to three turns. Insert the remaining three
screws, tightening a few turns.
5.
Completely tighten all screws evenly, in an alternating fashion.
Pipe Mount Installation
The ERT module can mount on a pipe vertically, diagonally, or horizontally using a Pipe Mounting Kit and
Remote Mount Kit (see
100W-R and 100WP-R Accessories
on page 11).
To mount the adapter plate on a vertical pipe
1.
Take the pipe bracket and band clamp from the Pipe Mount Kit.
