ITR MUPASZ 710 plus, Руководство пользователя, Страница: 6 / 36

User manual
Strona 6 z 36 IU_M710P_MANUAL_05i00_ENG
Options of protections

operation based on RMS or 1-harmonic

directional action

operation in CBF mode

operation in BPF mode

cooperation with ARF

voltage stabilization

frequency stabilization

harmonic stabilization

acceleration/deceleration of protection action
Measurements

current: I1, I2, I3, I0

voltage: U1, U2, U3, U12, U32, U13, U0

frequency: f

power: P, Q, S, cos φ

energy: EC+, EB+, EC- , EB-

angle between current signals and voltage signals

temperature: Θm (calculated from thermal model), Temp 1…6 (PT100)

diagnostics: THD (up to 40 harm), Tp (bay working time), Σ I (cumulated current )

resistance: Rrotor, Rhvt
Measurements, set two

current: 2.I1, 2.I2, 2.I3

voltage: 2.U1, 2.U2, 2.U3, 2.U12, 2.U32, 2.U13

frequency: 2.f
Diagnostic

SC - Selfcheck

voltage: supply, reference, battery

memory: program and data

correctness of internal module-to-module communication

calibration factors of measurement channels;

device set points

MAC - Manual Algorithm Check

CBD - Circuit Breaker Diagnostics
Autotest

CCT - Cumulated Current Test

CBCT - Circuit Breaker Control Test

HVT - High Voltage Test

PAT - Protection and Automation Test
Extensions

AI >>> - Autonomous independent overcurrent protection

DAR – Fault recorder

CDAR – Criterion recorder

PQA – Power Quality Analyzer

SLOG – System Log

RPS – Redundant Power Supply

UPS – Uninterruptible Power Supply