ITOX CT334exa, Руководство по эксплуатации

Страница: 9 / 22

CT334exa
5. Setting Up the CT334exa and Mounting the Components
7
5-3 Connecting the Line Cord
Connect the plugs of the line cord with the main unit and a wall outlet (100-240 VAC). A 3-pin
outlet (with a grounding terminal) should be used. If you use a 2-pin outlet (with a grounding
terminal), then attach the adapter (with a grounding cord) to the plug. Even in this case, a ground
must be established. See Figure 4. Establishment of a ground is very important for safe and proper
use of the CT334exa.
Warning
Your hands should be dry when you insert or pull out the plug. Otherwise, you may
receive an electrical shock.
5-4 Static electricity
(1) Every sheet of paper produces static electricity when it is being fed inside the CT334exa. If a
ground is not properly established, static electricity has nowhere to go and steadily accumulates
inside the unit. This may cause a malfunction of the electric system of the CT334exa.
(2) Even if a ground is established, static electricity may accumulate. In a very dry environment
with a low humidity of 10% or 20%, for example, excessive static electricity is produced without
being discharged to earth. In an environment with humidity of 55% or more, almost no static
electricity is produced, and static electricity, if any, is likely to be discharged into the air.
(3) Static electricity must be controlled for proper operation of the CT334exa. It is important to take
measures against static electricity because it causes paper jams among other errors.
(4) In an excessively dry environment, a humidifier must be used to control humidity.
Figure 4
3-pin outlet
2-pin outlet
With adapter