ITOX CT334exa, Руководство по эксплуатации

Страница: 7 / 22

CT334exa
4. Producing Printed Output
5
4-8 Do not cut newly printed output.
(1) Printed output must be set aside for 20-30 minutes.
(2) Output devices such as a color printer and color copier apply silicone oil on printed output.
(3) Paper coated with silicone oil is slick. So, such paper cannot be properly fed by the feed roller,
and stays inside the main unit or is cut unevenly.
(4) Over time, silicone oil is absorbed by the paper. This makes the paper less slick. Instead of
cutting printed output at once, allow the coated silicone oil to dry before cutting the paper.
**** Curling and wavy paper ****
Curling or wavy paper is not cut as intended. Flatten the paper as much as possible before it is
cut.
If paper is excessively curling or wavy, the CT334exa cannot feed or cut the paper properly.
This causes skewed paper feeds, inaccurate cutting, and/or paper jams due to a feed error.
The CT334exa can cut paper that satisfies the following requirements.
The difference in height between both the top
and bottom of paper and the horizontal surface is
not more than 10 mm. The difference in height between both the left
and right edges of the paper and the
horizontal surface is not more than 5 mm.
The difference in height between the crests and
troughs is not more than 5 mm. Paper is not curling downward.
10 mm
10 mm
5 mm
5 mm
5 mm
5 mm
Feed
direction
Feed
direction
Feed
direction
Feed
direction