RECEIVER IT3R10
USER MANUAL
10
6. MAINTENANCE
The product you have purchased is made with the highest quality materials that ensure the perfect
functioning and operability of the radio remote control. Like any other machine or equipment, the remote
control requires a minimum of basic maintenance that must be done.
In order to increase the life of your appliance as much as possible, and to avoid unnecessary repair costs,
we recommend that you carefully follow the following maintenance and maintenance tips:
¡ATTENTION!:
ORIGINAL SPARE PARTS SHOULD BE USED FOR ALL REPAIRS,
SAFETY SPECIFICATIONS OF THIS EQUIPMENT AND OF THE TRANSMITTER AND
UHF RECEIVER SHOULD NOT BE MOVED.
.
¡ATTENTION!:
BEFORE HANDLING THE TRANSMITTER, TURN OFF THE GENERAL
SWITCH OF THE MACHINE..
6.1. MAINTENANCE OF THE RECEIVER
During maintenance of the receiver the following parts will be checked:
The connection between the receiver and the electrical equipment of the machine.
The correct working order of the active and passive safety circuits.
The correct working of all LEDs through the start test.
The correct closing of the cover and gland.
The firm fastening of the whole unit.
If you have an external antenna, check that the connection is clean and free of rust.
To check the working order of the active safety circuit, simply press the STOP BUTTON while the remote
control is on. The general contactor should drop immediately..
To check the working order of the passive safety circuit, remove the battery from the transmitter. The
general contactor should drop after within a maximum of 1.6 seconds.