Itowa CTN, Руководство пользователя

Страница: 20 / 28

 
MINI RECEIVER
USER'S MANUAL
14
6. MAINTENANCE OF THE RECEIVER
The receiver you have purchased is made of top quality materials that ensure perfect operation and
functionality. Like any other machine or device, this receiver requires a few basic attentions that
should be satisfied. In order to increase the useful life of your receiver as much as possible, and to
avoid unnecessary repair costs, we strongly recommend you to follow the following conservation
and maintenance tips:
• Use the mounting accessories properly and adjust them in a way that the use of the receiver
is comfortable and safe.
• Avoid unnecessary impacts.
• It is advisable not to leave the receiver unnecessarily exposed to the sunlight.
ATTENTION! ORIGINAL SPARE PARTS MUST BE USED FOR ANY REPAIR AND
UNDER NO CONCEPT SHOULD THE SECURITY CHARACTERISTICS
OF THE RECEIVER BE ALTERED.
For the maintenance of the receiver, the following parts must be checked:
• The connection between the receiver and the machine's electrical system.
• The correct operation of the active and passive safety circuits.
• The correct operation of all the LEDs through the start-up test.
• Correct closing of the receiver cover and packing gland (Model CTN).
• The firm subjection of the whole assembly.
• If you have an external antenna, check that the connection is clean and free of rust.
In order to check the functioning of the active safety, it will be enough to activate the EMERGENCY
STOP on the transmitter while it’s running. The general contactor must fall immediately.
To check the function of the passive safety, disconnect the power supply or battery of the
transmitter. The general contactor should fall out after no more than 1.9 seconds.