PRO 36 AD
This document is protected by copyrights.
Copying, using, or distributing without permission of PROMOTECH is prohibited.
7
20. Do not use on surfaces that are rough, not flat, not rigid, or have rust, paint,
chips, or dirt.
21. Use the safety strap to attach the machine to a stable structure. Put the strap
through the hole in the machine body. Do not put the strap into the buckle from
the front.
22. Use eye and ear protection and protective clothing. Do not use loose clothing.
23. Each time before you put the machine on the surface, rub the surface with
coarse-grained sandpaper. Make sure that the bottom of the base is in full
contact with the surface.
24. Do not touch chips or moving parts. Do not let anything catch in moving parts.
25. After each use, clean from the machine and the tool. Do not remove chips with
bare hands.
26. Unplug the power cord before you do maintenance or install/remove parts.
27. Repair only in a service center appointed by the seller.
28. If the machine falls, is wet, or has any damage, stop the work and immediately
send the machine to the service center for check and repair.
29. Do not leave the machine when it operates.
30. If you are not going to use the machine, remove the tool from the holder. Then,
remove the machine from the work area and keep it in a safe and dry place.
31. If you are not going to use the machine for an extended period, put anti-corrosion
material on the steel parts.
