PRO 36 AD
This document is protected by copyrights.
Copying, using, or distributing without permission of PROMOTECH is prohibited.
15
To install the assembly, unplug the power cord. Lift the chip guard and turn the handle
to the left (
1
) to lower the
standard TCT quill assembly as much
as
possible.
Next,
remove
the
handle and
use
pliers
to
remove
the retaining rings (
2
)
. Push
out
the
shaft
(
3
)
by
16
mm
(10/16
″)
. This will
remove
the TCT
quill
assembly
(
4
).
Install the HSS quill
assembly (
5
)
and push in the shaft (
6
)
. Then, put the retaining rings back in place (
7
).
1
7
2
3
4
5
6
2
7
