IST144 05/19
Certification
All Hanna Instruments products conform to
CE
European Directives
.
Disposal of Electrical & Electronic Equipment.
The product
should not be treated as household waste. Instead hand it over
to the appropriate collection point for the recycling of electrical
and electronic equipment which will conserve natural resources.
Disposal of waste batteries.
This product contains bat-
teries, do not dispose of them with other household waste.
Hand them over to the appropriate collection point for recycling.
Ensuring proper product and battery disposal prevents poten-
tial negative consequences for the environment and human
health. For more information, contact your city, your local
household waste disposal service, the place of purchase or go
Recommendations for Users
Before using Hanna Instruments products, make sure that they
are entirely suitable for your specific application and for the
environment in which they are used. Any variation introduced
by the user to the supplied equipment may degrade the meter’s
performance. For yours and the instrument safety do not use or
store the instrument in hazardous environments.
Operational Guide
Technical Service
This instrument is factory calibrated, but it is generally
recommended to have all thermometers recalibrated at least
once a year.
For an accurate recalibration, contact your nearest Hanna
Customer Service Center.
Initial Operation
The logger is supplied complete with a CR2032 lithium battery.
Open the battery compartment cover (see “Battery Replacement”
section for details), insert the battery with the + sign facing
up and tighten back the compartment cover.
The display will show the
“PC”
message
to indicate that the logger needs to be
programmed through a PC.
Startup
In order to communicate with the logger, the application
software must be installed on your PC.
Connect
HI144002
communication cradle to your computer
through a USB port, and place the
HI144
on the cradle.
Run the application software. The yellow LED on the cradle
blinks to indicate that the communication is active.
Do not
remove the logger while the LED is blinking
.
The following operating parameters can be set:
• Measurement Unit: °C or °F
• Starting Type: PC Start, Button Start or Date/Time Start
(hh:mm:ss)
• Logging Method: Wrap Around Memory, until memory is full (at
8000 samples) or number of samples (a maximum of 8000)
• Logging Interval: from 1 minute to 24 hours (1 minute
resolution)
• High and Low Alarm thresholds
• Logger Password
Click on the
Program
key to program the logger with the
selected options.
Wall Installation
The logger is supplied complete with wall cradle and lock
(mounting materials as screws and dowels are not included).
Position the wall cradle at the desired location and fix it to the
wall with proper screws.
Insert the logger into the cradle and secure it with the supplied
lock.
www.
.com
1.800.561.8187
