Battery Replacement
Each time the battery is installed, the logger enters reset status
and displays the “
PC
” message.
Then it starts to calculate remaining battery life and displays
current battery level through a 4-tag indicator.
When the last tag (empty battery) starts blinking, the battery
level is below 5%. It is recommended to change the battery
with a new one.
Battery replacement must only take place in a safe area and
using the appropriate battery type (CR2032 3V lithium battery).
Note:
It is recommended to use a new battery for
replacement, otherwise the battery level indication may
not be reliable.
When the battery needs to be replaced, open the battery
compartment cover at the back using a small coin. Turn
counter-clockwise to open.
Insert the new battery with the + sign facing up, tighten back
the compartment cover and program the instrument.
Note:
Dispose the depleted battery (Li) according to local
regulations.
Preliminary Examination
Remove the instrument from the packing and examine it carefully
to make sure that no damage has occurred during shipping.
Notify your nearest Hanna Costumer Service Center if damage
is observed.
Note:
Save all packing material until you are sure that the
meter works correctly. Any damaged or defective items
must be returned in their original packing material together
with the supplied accessories.
Each
HI144
is supplied with:
• CR2032 lithium battery
• Wall cradle
• Lock
• Instruction manual
Each
HI144-10
is supplied with
•
HI144
•
HI144002
USB communication cradle
• CR2032 lithium battery
• Wall cradle
• Lock
• Instruction manual
Data transfer to PC
To download logged data, remove the logger from its installation
and place it on
HI144002
communication cradle connected to
your PC through a USB port.
The memory content can then be downloaded from the instru-
ment to the PC using the Windows
®
compatible application
software offered by Hanna Instruments.
This software allows you to use the powerful capabilities of most
spread sheet programs (e.g. Excel
©
, Lotus 1-2-3
©
) and to make
any elaboration available (e.g. graphics, statistic analysis, etc.).
The user-friendly online help and clear messages will support
you throughout.
During data transfer the yellow LED on the cradle blinks to
indicate that the communication is active.
Do not remove
the logger while the LED is blinking
.
LCD Functional Description
1
2
3
8
7
6
5
4
1. “
WAIT TO LOG
”: Waiting to start logging
2. “
LOG
”: Logging in progress
3. “
LOG DONE
”: Logging completed
4. High and Low alarm values
5. Measurement unit
6. Start by pressing the logger button
7. Battery level indicator
8. Maximum and minimum logged values
Thank You
Thank you for choosing a Hanna Instruments product. Please
read this instruction manual carefully before using the meter.
For more information about Hanna Instruments and our
products, visit www.hannainst.com or e-mail us at sales@
hannainst.com.
For technical support, contact your local Hanna Instruments
Office or e-mail us at [email protected]
Find your local Hanna Instruments Office on www.hannainst.com
PC Software
The
HI92144
PC application software supports communication
between the logger and a PC. The PC compatible software is
available for download at
http://software.hannainst.com
.
Select the product code and click
Download Now
.
After download is complete, use the
setup.exe
file to install
the software.
www.
.com
1.800.561.8187
