RLC-200
DOC-RLC200-MNL Rev8.doc (6/13/2017)
Copyright 1999-2017 ITL, LLC
Page 9
of
15
Electrical Connections
All electrical control connections are made on P1, P2 and P4 located at the bottom of the
controller. Connections for alarm relays are made on P5 and P6 located on the right side
of the controller. Typical connections for a 120VAC system are shown below.
It is the responsibility of the installer to comply with all applicable local,
state, and federal regulations for installation and operation of this device.
