RLC-200
DOC-RLC200-MNL Rev8.doc (6/13/2017)
Copyright 1999-2017 ITL, LLC
Page 7
of
15
Installation
The following section describes how to install the RLC-200 controller. The Obstruction
Lights (markers) should be installed according to the manufacturer’s instructions.
Unpacking your RLC-200 Controller
Please examine the shipping containers and their content thoroughly upon receipt and
report any potential shipping damage to the carrier.
Quick Installation Guide
The quick start guide shows how to install the RLC-200 controller.
Remove RLC-200 controller from packaging material.
Mount the RLC-200 enclosure.
Install FAA type L-810 incandescent or FAA type L-810(L) LED obstruction lights
per manufacturer’s instruction and FAA requirements.
Install cable from RLC-200 to L-810 obstruction lights (markers) per
manufacturer’s instructions.
Install Photoelectric Cell and socket (ITL P/N: PEC-1800-120, PEC-SOCK-000).
Install 120Vac line power to the RLC-200 Controller.
