ILS Strobe Lighting Systems
DOC-3400-MNL Rev23.doc
(9/22/2021)
Copyright 2007-2021 ITL, LLC Page 55
of
86
ii. Configuration DIP Switch
In addition to the two toggle switches the ITL-3400 has a two hardware configuration
switches, SW4 and SW5 . The board will follow operation of this hardware configuration
switch unless overridden by remote software. This is only the case for systems which are
connected to a separate ITL monitoring product and communicate with ITL’s ADP family
of software tools.
DIP Switch
ON
OFF
1
Strobe Configuration Detail Table (see below)
2
Strobe Configuration Detail Table (see below)
3
Strobe Configuration Detail Table (see below)
4
LED Sidelights
Inc. Sidelights
(Factory Default)
5
Sidelight Configuration Table (see below)
6
Sidelight Configuration Table (see below)
7
ITL-3421-SEN
(Factory Default)
ITL-3420-SEN
8
RTO Enable
(Factory Default)
DIP Switch
ON
OFF
1
CAT / Triple
Single
2
CAT_MID / Slave/ CAT_BOT
Master
3
CAT_TOP / MID2/ CAT_BOT
MID1
4
CAT / 30FPM / Flashing SL
(Factory Default)
20 FPM
Figure 50: ITL-3400 DIP Switch Location Detail
Figure 51: ITL-3400 Configuration DIP Switch SW4 Table
Figure 52: ITL-3400 Configuration DIP Switch SW5 Table
