ITL HD 7515, Руководство пользователя

Страница: 13 / 94

figure 5 figure 4
figure 6 figure 7
13
Installation
Connect the low voltage wires to the low voltage inlet on your unit.
To do so:
1. Strip wires over 1 cm (1/2 inch)
(figure 4)
.
2. Gently press on the toggle to open the connector (figure 5) .
3. Insert stripped wire (figure 6) .
4. Release toggle to secure wire in connector
(figure 7)
.
5. Repeat for second wire.
To disconnect:
1. Gently press on the toggle to open the connector.
2. Remove low voltage wire from connector.
Low Voltage Connections