O
PERATING
I
NSTRUCTIONS
O
VERVIEW OF
A
PPLICATIONS
ITI Model 135310 Under Door Remote Viewing Kit employs a unique probe intended for covert surveillance. The
scope’s 3.5” or 7.0” long blade is structured to allow surveillance into an adjacent room by utilizing the ¼” space
available under most doorways.
The Right Angle Viewing Adapter allows the user to view behind doors to search for obstacles and/or barricades.
Optional accessories, Infrared Emitter Kit , Night Vision Scope and video cameras can be used in low or no light
situations.
This kit is intended to provide maximum resolution, portability and quick setup, and also features a dedicated “C”
mount for video camera attachment.
I
NSTALLATION
& M
OUNTING
CAUTION
BORESCOPES ARE DELICATE GLASS INSTRUMENTS, AND SHOULD BE TREATED ACCORDINGLY.
PROPER HANDLING AND CLEANING TECHNIQUES WILL GREATLY INCREASE THE LIFE OF THIS
INSTRUMENT. ONLY TRAINED OPERATORS SHOULD HANDLE THIS EQUIPMENT.
DO NOT BEND
OR
APPLY UNNECESSARY STRESS.
U
NDER
-D
OOR
RVI I
NSERTION
The working length blade of this instrument is made from a hardened tool steel. Although it is designed to
withstand normal field use for its intended application, the probe should never be forced.
The ¼” space available under most doorways allows sufficient clearance to utilize this instrument. With the scope
fully assembled, for visual or video use, the blade should be carefully inserted under a doorway. Never use the
RVI to pry door. If there is insufficient space to insert blade of scope, use a Uni-Bar to gently lift door, then insert
blade. The Uni-Bar is an available item for purchase from ITI.
For initial insertion, the operator should view through the scope, using either eyepiece of monitor, to insure that a
clear insertion path is available. If any obstructions are noticed, try another location.
It is also recommended that the initial insertion be performed without the Right Angle Adapter. This will allow for a
better view to assess the condition within the room.
After the room has been fully viewed, the Right Angle Adapter can be used to observe the inside surface of the
door. This is especially useful to detect for locks, braces or barricades.
For low, or no, light situations, optional accessories are available. Night Vision Scopes or low light video cameras
greatly enhance low light scenes. The Infrared Emitter Kit also enhances the performance of Night Vision Scope
for extremely dark rooms.
C
AMERA
C
ONNECTION
A standard “C” mount is supplied on the rear of the RVI. For use with 1/3" CCD cameras, use the "C" Mount
Extender supplied with the camera. Screw camera onto the “C” mount or “C” Mount Extender until it bottoms out.
ITI recommends a 1/3” format CCD for use with this RVI. A 1/2” format CCD can also be used, although the
monitor image will be quite small. ITI suggests the 1/2” format low light CCD camera with NVPS.
To obtain an upright image on the monitor, hold RVI stationary and rotate rear knob and camera together