Itho Daalderop HRU 400, Инструкция по установке и использованию

Страница: 27 / 49

27
Note
If you are unable to complete the wireless control log-in within 2
minutes, you can put the ventilation unit back into pairing mode
via the Itho Daalderop
service app. Controls already notified
remain notified on the ventilation unit.
Note
The QR code can be found on the electronics compartment,
above the power cable and on the type plate.
5. Commissioning
5.1. Preparation
Prior to commissioning (IBS)
● The ventilation unit and accessories must be mounted.
● The ductwork must be mounted.
● The condensation drain must be installed.
● External and internal doors and windows must be closed.
●
There must be sufficient flow-through space under the inner
doors.
●
The adjustable valves must be fully open in
all
rooms.
c) Scan the QR code on the device with your smartphone. The
LED on the device will light up blue as soon as a connection is
established.
5.2. Commissioning
Commissioning of the HRU 400 is done via the Itho Daalderop
service app.
a) Bring the ventilation unit under tension.
b) Use the button on the unit to set the unit to
Commissioning mode (Wi-Fi mode). The LED on the unit
will pulse blue faster.
d) Start the IBS wizard on the Itho Daalderop service app you
downloaded earlier and follow the instructions. You will be
guided through a menu that guides you through the
commissioning process.
ä Attention
!
Increasing the maximum flow rate causes more noise and
higher energy consumption.