manualshive.com logo in svg

Ithaca Epic 950, Руководство по интеграции

Поделиться
Скачать
Ithaca Epic 950 Скачать руководство пользователя страница 61

Operational Procedures 

 

Epic 950

 OEM Integration Manual 

 

 

95-05245

 

Rev  G 

Page 49 

 

Removing Loaded Tickets 

 
The Epic 950 printers have two ways to remove unused tickets from the printer 
mechanism: 
 

•

  The first way is to release the Ticket Cover by lifting and rotating backward, this 

will relieve pressure to the platen and tickets can be removed. This also will allow 
an opening that provides space to check the printer for ticket jams, or prepare the 
paper path for ticket replenishing.  

 

•

  The second way is to use the feed button, which will feed out tickets from within 

the printer mechanism. 

 

 

Figure 19. Ticket Cover Shown Open for Ticket Removal  

 

Unloading Tickets from the Printer by opening the Ticket Cover 

 

1.  Pull Inner Chassis away from the Outer Chassis until it stops in the open 

position. 

2.  Lift and rotate the Ticket Cover backwards, towards the rear  of the printer. 
3.  Remove all tickets from the ticket path and check for any debris. 
4.  Remove any remaining tickets from the ticket tray. 
5.  Rotate the Ticket Cover into its original closed and latched (Magnetic) position. 

Содержание Epic 950































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды