manualshive.com logo in svg

Ithaca Epic 950, Руководство по интеграции

Поделиться
Скачать
Ithaca Epic 950 Скачать руководство пользователя страница 29

Epic 950 Specifications and Requirements 

 

Epic 950

 OEM Integration Manual 

 

95-05245

 

Rev  G 

Page 17 

 

Black Dot Position and Presentation Scheme 

All graphics preprinted on the ticket must be in thermal paper compatible ink. 
 
Black Dot Position 
The back of the ticket is used for the Black Dot/Top of Form indicator. For the printer to 
sense when a ticket has been indexed to the printing position, a Black Dot/Top of Form 
sensor is needed. It must be printed in black, thermal paper compatible, infrared 
readable ink.  The 10.16mm area in line with the Black Dot/Top of Form indicator and 
the ticket edge (keep-out zone) must remain clear, as the Ticket Out Sensor will read 
that area while the ticket is printed and presented. The remaining area on the back of the 
ticket may be used for rules and disclaimer.  

 

Figure 6. Location of Black Dot/Top of Form Indicator on Back of Ticket 

 

 

 

Содержание Epic 950































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды