11
Positioning Proximity-Switch Cams
The Proximity-Switch Cams run through Timing-Belt Reverse Unit 8 80 R25.
When used on the drive-side Timing-Belt Reverse Unit 8 80 R25, they are
particularly useful for simplifying the wiring between Drive Unit, limit switch
and motor control unit.
Positioning Proximity Switches
The Proximity-Switch Fastening Set can be used to position and secure induc-
tive Proximity Switches for homing positions and electric terminal position
limits in the system groove of Timing-Belt Reverse Unit 8 80 R25.
The Proximity Switch fixings must be shortened as appropriate to the applica-
tion scenario.
Similar to the picture
The Proximity-Switch Cams are used to mark the electric terminal position
limit and the reference point of the moving unit and Timing Belt. Push them
into the Timing belt from the smooth side, locating them at the desired point
along the length of the belt and centrally in the width of the belt.
The Proximity-Switch Cams can run through Timing Belt Reverse Units 8 40
R25 because the timing pulleys in these units feature a corresponding cut-out.
