9
ØD
k
min
k
max
a
b
M
∅40
∅15
2.5
∅47
54
□80
⌀50
□80
10
66
⌀19
30
[mm]
8 40 D40/D15
⌀ D
6-24
a
10
b
64
k
min
31.7
k
max
40
Coupling half that accommodates the drive shaft
Coupling Housing with hole (that can be sealed) to allow an Allen key through
to generate the necessary clamping force on the drive shaft.
Connecting Drive Set KGT D40/D15 - 0.0.667.76
The Chain is driven at Chain Reverse Units 8 80. The housings of the Chain
Reverse Units feature a thread for screw-attaching Drive Set 8 40 D40/D15.
Two Hexagon Socket Head Cap Screws DIN 7984 M6x45 are supplied with
the Drive Set for this purpose and are screwed through the Coupling Housing
and into Chain Reverse Unit 8 80.
Tightening torque: T = 14 Nm
Machine the drive casing or Adapter Plate according to the requirements of
the motor or gearbox you are using and then screw it to the motor or gearbox.
Take the coupling half that is to be connected to the drive shaft and drill a hole
in it to match the drive shaft then connect the coupling half and the shaft.
The torques transferred by the clamp connection factor in the maximum
mating play for the shaft fits: Shaft k6 / hole H7.
Force is transferred from the coupling to the drive shaft by means of frictional
resistance. The Shaft and the hole in the coupling hub must be degreased and
cleaned to ensure the frictional resistance is effective. Hexagon Socket Head
Cap Screws must be secured against working loose.
Connecting Drive Set 8 40 D40/D15 – 0.0.668.02
