Advanced Settings
37
7.Hardware Setup
Multi Zone
Setting Item
Default Value
Setting Details
Zone 2 Out
Fixed
Select which of the integrated amplifier in a
separate room or this unit should be used to
adjust the volume when Zone 2 is active.
"Fixed": Adjust on the Integrated amplifier in a
separate room
"Variable": Adjust on the unit
Zone 2 Maximum
Volume
Off
Set the maximum value for Zone 2 to avoid too
high volume.
Select a value from "Off", "50" to "99".
Zone 2 Power On
Volume
Last
Set the Zone 2 volume level of when the unit is
turned on. Select a value from "Last" (Volume
level when the unit was turned off), "Min", "1" to
"99" and "Max".
•
You cannot set a higher value than that of
"Zone 2 Maximum Volume".
Tuner
Setting Item
Default Value
Setting Details
AM/FM Frequency
Step
(North American
model)
10kHz/200kHz
Select a frequency step depending on your
area of residence.
Select "10kHz/200kHz" or "9kHz/50kHz".
•
When this setting is changed, all radio
presets are deleted.
AM Frequency Step
(Australian model)
9kHz
Select a frequency step depending on your
area of residence.
Select "10kHz" or "9kHz".
•
When this setting is changed, all radio
presets are deleted.
HDMI
Setting Item
Default Value
Setting Details
HDMI CEC (RIHD)
Off
Setting to "On" enables the input selection link
and other link functions with HDMI connected
CEC compliant device.
"On": Use this function
"Off": Do not use this function
•
Depending on the TV set, a link may need to
be configured on the TV.
•
This function is effective only when the
device is connected to the HDMI OUT MAIN
terminal.
•
Setting to "On" and closing the on-screen
menu displays the name of the CEC-
compatible components and "RIHD On" on
the display.
•
Power consumption in standby mode may
increase if "On" is set. (Depending on the TV
status, the unit will enter the normal standby
mode.)
•
If you operate the Master Volume control of
the unit when this setting is set to "On" and
you are listening to the audio through the
speakers of your TV, audio will be output also
from the speakers connected to the unit. If
you want to output from only either of them,
change the unit or TV settings, or reduce the
volume of the unit.
•
If abnormal operation occurs when you set
the setting to "On", set it to "Off".
•
When connecting a non-CEC compatible
component, or when you are not sure
whether it is compatible, set the setting to
"Off".
•
When changing this setting, turn off and
then on again the power of all connected
components.
