Advanced Settings
25
Setting Item
Default Value
Setting Details
Subwoofer
12.0 ft/3.60 m
Specify the distance between each speaker and
the listening position.
Height Left
9.0 ft/2.70 m
Specify the distance between each speaker and
the listening position.
Height Right
9.0 ft/2.70 m
Specify the distance between each speaker and
the listening position.
•
When the speaker is set to "No" or "None" in "Speaker Configuration", the settings for "Speaker
Distance" cannot be changed.
•
Default values vary depending on the regions.
Level Calibration
Adjust the level of each speaker with the built-in test tone. Settings are automatically
configured if you use the Automatic Speaker Setup.
Setting Item
Default Value
Setting Details
Front Left
0 dB
Select a value between "-12 dB" to "+12 dB". A
test tone will be output each time you change
the value. Select the desired level.
Center
0 dB
Select a value between "-12 dB" to "+12 dB". A
test tone will be output each time you change
the value. Select the desired level.
Front Right
0 dB
Select a value between "-12 dB" to "+12 dB". A
test tone will be output each time you change
the value. Select the desired level.
Surround Right
0 dB
Select a value between "-12 dB" to "+12 dB". A
test tone will be output each time you change
the value. Select the desired level.
Back Right
0 dB
Select a value between "-12 dB" to "+12 dB". A
test tone will be output each time you change
the value. Select the desired level.
Back Left
0 dB
Select a value between "-12 dB" to "+12 dB". A
test tone will be output each time you change
the value. Select the desired level.
Surround Left
0 dB
Select a value between "-12 dB" to "+12 dB". A
test tone will be output each time you change
the value. Select the desired level.
Setting Item
Default Value
Setting Details
Subwoofer
0 dB
Select a value between "-15 dB" to "+12 dB". A
test tone will be output each time you change
the value. Select the desired level.
Height Left
0 dB
Select a value between "-12 dB" to "+12 dB". A
test tone will be output each time you change
the value. Select the desired level.
Height Right
0 dB
Select a value between "-12 dB" to "+12 dB". A
test tone will be output each time you change
the value. Select the desired level.
•
In the following cases, the settings for "Level Calibration" cannot be changed:
– The speaker is set to "No" or "None" in "Speaker Configuration".
– Mute (MUTING) is set.
3.Audio Adjust
Configure various settings related to sound, such as settings for listening to multiplex audio
or multilingual TV broadcasts and sound field settings for listening modes.
Multiplex/Mono
Setting Item
Default Value
Setting Details
Multiplex
Input Channel
Main
Set the audio channel or language to be output
when playing multiplex audio or multilingual TV
broadcasts etc.
"Main": Main channel only
"Sub": Sub channel only
"Main/Sub": Main and sub channels will be
output at the same time.
•
If multiplex audio is being played, "1+1" will
be displayed when Display on the main unit is
pressed.
Mono
Input Channel
Left+Right
Set the input channel to use for playing any 2
ch digital source such as Dolby Digital, or 2-ch
analog/PCM source in the Mono listening mode.
"Left": Left channel only
"Right": Right channel only
"Left+Right": Left and right channels
