ITech IT-E255A, Руководство пользователя

Страница: 27 / 43

Function and Features
controller before manual test. The List file can support the edit of 1~99 steps,
and select to judge Pass or Fail based on the judgment conditions set for each
step.
This Chapter describes the manual test under List mode in the IT-E255A quick
charger controller.
Preparation before Test
•
At first, the user connects the test lines. For detailed connection method,
please refer to Chapter
2.1 Connecting the Device Under Test .
•
The List file has been edited in the host computer software and saved in the
IT-E255A quick charger controller. For detailed editing method of List file, re-
fer to
2.3.2.3 Test under List Mode .
Operation Method
1. Power on the electronic load.
The List file has defined related parameters of the load, and the user
needs not to manually set the load.
2. When the IT-E255A is supplied with power, the display is shown as below.
First row: Display the protocol mode of the existing test.
Second row: Display the voltage setting value under the existing protocol
mode.
3. Press MODE button, and select List Mode.
If the instrument does not save the edited List file, the instrument inter-
face displays “Empty”. Please use the host computer software for editing
again and save the file.
Copyright © Itech Electronic Co., Ltd.
17