Whichever configuration you choose use two securing bolts in each end of each rail. Use 16mm long Bolt
(#07) and secure with Flanged Nut
6) Lift your machine onto the wheel base. Get somebody to help you if your machine is heavy.
Safety Considerations
i) Put the base on a level surface and adjust
the rubber feet to level before mounting your
machine. This will keep the machine from rock-
ing when testing it for stability.
ii) Test for stability in both the raised (portable
mode) and the lowered (stationary mode) posi-
tions. Use caution when testing the stability of
top heavy machines such as Bandsaws, Pillar
Drills and Morticers.
iii) Unplug any power to the machine before
moving or repositioning the machine.
iv) Always test your set-up for stability and
safety after repositioning.
v) Care should be taken when planning the
orientation of the machine onto the Universal
Wheel Base. When positioning a machine take
advantage of the centre of gravity and position
so that it will remain stable while on the castors.
The heaviest end of a machine should be at
the fixed wheel end.
vi) Never use the machine while it is in the raised (mobile mode) position and always lower the machine before
operating.
vii) When moving the machine, always push on the base and not the machine itself.
vii ) Do not exceed the maximum weight load of 317 kg.
