Itec 4000, Руководство пользователя

Страница: 14 / 20

14
Setup / Operation
LCD Reminders
Replace Plate
When “ Replace Plate ” appears, the Purification Plate has reached the end of its useful life and must be replaced. To order a replacement, contact your distributor or
Inspired TEC (
www.inspiredtecllc.com
). Once a replacement has been obtained, follow the instructions in “ DISASSEMBLY/ASSEMBLY ” to replace your old Purification
Plate with your new one.
Replace PCO Cell
When “ Replace PCO Cell ” appears, the PCO Cell has reached the end of its useful life and must be replaced. Contact your distributor or Inspired TEC (
www.
inspiredtecllc.com
) to order a replacement. Once a replacement has been obtained, follow the instructions in “ DISASSEMBLY/ASSEMBLY ” to replace your old
PCO Cell with your new one.
Perform Cleaning
“ Perform Cleaning ” will display once the 30 day operation cycle between cleanings has passed and the unit requires a complete cleaning. Follow the instructions in
“ CLEANING ” (page 17) then see “ Resetting Reminders ” (below) to reset the reminders. The Perform Cleaning reminder will appear again after 30 day of operation.
Resetting Reminders
After replacing the Purification Plate or the PCO Cell , the corresponding reminders will reset themselves. After performing a cleaning of the unit (see “ CLEANING ” page
17) you should reset the reminders by holding down the Reset Reminders button on the Control Panel of the unit. The reminder has been reset when Perform Cleaning no
longer appears.