ITC WTRTEC Green, Руководство пользователя

Страница: 15 / 24

15
Configuration
4.7.1 Initial configuration (SET UP)
ENT
CONFIG. COMMUNICA TIONS
Node: 0 2
Baudrate: 1200
Parity: N
Stop bits : 1
CONFIG
SET UP
COMUNICA TIONS
CHECK / MONITOR
- Units:
Enables selection of the working units for the flow rate (litres or gallons) and temperature (Celsius or
Fahrenheit)
- pH Control:
To select whether the pH control uses an acid or a base
- pH Reading:
To enable or disable the pH reading, or set the reading manually
- Temp. Reading:
To enable or disable the temperature reading, or fix a value manually. If using an ITC EC sensor, which
includes an internal temperature sensor, the reading will be the measure by this sensor.
- LCD auto:
Energy saving option that allowing for switching off of the screen if no action has taken place through the
menu in one minute
- EC Sensor:
Allows for selection of EC sensor type between the ITC sensor and a generic sensor with a cell constant
k=1
4.7.2 Communications settings
Setting the communications parameters via the RS485 port. Node, Baud Rate, Parity, and stop bit.
CONFIG. COMMUNICA TIONS
Node: 0 2
Baudrate: 9600
Parity: N
Stop bits : 1
CONFIG
SET UP
COMUNICA TIONS
CHECK / MONITOR
CONFIG. SET U P
UNITS
PH CONTROL
PH READING
CONFIG. SET U P
ENT
FLOW Lenguage: ENG
TEMP.READING Reset params: Y
EC SENSOR LCD AUTO
FLOW
TEMP. READING
EC SENSOR