ITC TS-0695, Руководство пользователя

Страница: 7 / 16

7
Menu Parameters:
 PAN SPEED Default value: 30
Adjustable pan movement speed scope 1~63
 TILT SPEED Default value: 30
Adjustable tile movement speed scope 1~63
 SCAN SPEED Default value: 6
Adjustable pan movement speed scope 1~63

TOUR PATH Default value: 1
Optional tour path at 1~4
 TOUR DWELL(Tour duration time) Default value: 5
Tour duration is 1~60 seconds
 PROPORTION (Speed matching) Default value: ON
ON means enable speed match function, OFF means not.
 AUTO REV Default value: P
Image auto flip(positive)/N(upside down)/OFF
 FRAME Default value: 60HZ
Support 60Hz & 50Hz for optional
Note:
60Hz mode, camera output 1080p30 as default, support 1080p@30/25/20/15/10/5, 720p, 800x600,
640x480/60/50/30/25/20/15/10/5;
50Hz mode, camera output 1080p@25 as default, support 1080p@25/20/15/10/5, 720p, 800x600,
640x480/50/25/20/15/10/5;
LENS OSD
Access LENS OSD from remote controller, there is OSD menu display on screen and its possible to adjust
or change any settings of lens OSD. (Up/down direction key to change the menu, left/right direction key to
change the parameters value)
 DISPLAY Default value: OFF
SUPPORT ON/OFF
 SHARPNESS Default value: NORMAL
LOW/HIGH

SATURATION Default value: NORMAL
LOW/HIGH
 NR (Noise Reduction) Default value: 3
Adjustable Value 0~5
 WB (White Balance) Default value: Auto
AUTO/MANUAL/OUTDOOR/INDOOR/ONE PUSH/ATW
 R GAIN (RED RAIN) Default value: 206