4
Rear Board & function
1. Front View
1) Lens
Adopted 10x optical auto focus lens
2) IR Receiver
To receive IR mote controller signal LED
3) Power LED
LED Blinking when power plug in, Blue color Led
4) Stand by LED
LED blinking while shut down camera use remote controller, and Orange color
5) IR Receiver
To receive IR mote controller signal LED
2. Dip-switch Settings
1) Dip-switch 1(Set Communication baud rate)
ON=>38400bps, OFF=>9600bps
(Please set the baud rate before turn on power. Baud rate setting failed if turn off power.)
2) Dip-Switch 2(Set Control protocol)
ON: RS-485 &PELCO-D (ON=RS485&Pelco-D)
OFF: RS-232C&VISCA (OFF=RS232C &VISCA )
3) Dip-Switch 3 (Set as Upgrading)
Set dip switch 3 as ON, then you can do upgrading of the camera, Must Set OFF as usual working.
4) Dip-Switch 4& 5 (Set address code)
When you used RS232C &VISCA to control multi-cameras, suggest to set address code as
OFF;
