4
ENGLISH
FRANÇAIS
n
120 V, 60 Hz, 9 amps
n
Variable speed: 0-850 rpm
n
Chuck capacity: 13 mm / 1/2", key included
n
27:1 double gear reduction drive
n
Trigger features finger-tip forward/reverse, speed regulation dial, and lock-on
button
n
Three-position side handle fits left, right, and centre
n
Spade-type D-handle is removable, or positions vertically or horizontally
n
Accessible motor brushes
n
Tool weight: 3.6 kg / 8 lb.
n
Package weight: 4.1 kg / 9 lb.
FUNCTIONAL DESCRIPTION
A. 1/2" 3-jaw chuck
B. Hole for chuck key insertion
C. Metal gear housing with hardened alloy gears
D. Auxiliary side handle
E. D-handle retention knob
F. Re-positionable spade-type D-handle
G. Motor brush dust cover cap
H. Trigger lock button
I. Variable speed trigger
J. Speed regulation dial
K. Finger-tip control forward / reverse lever
Your new ITC 011232 1/2" VARIABLE SPEED D-HANDLE DRILL package
contains:
n
Drill
n
Chuck key
n
Auxiliary side handle
n
Re-positionable spade-type D-handle
CAUTION:
This tool is heavy and is quite powerful. We recommend both the
handles be attached whenever possible.
The D-handle can be mounted over the cross-shaped boss at the back of the
housing. in either a vertical or horizontal alignment:
1. Hold it in place by firmly tightening the black 32 mm / 1-1/4" diameter knurled
knob through the D-handle into the threaded hole in the boss.
2. The auxiliary side handle should also be mounted.
3. Screw the threaded end of the handle into one of the three threaded holes in
the metal gear housing, depending on which position works best for the job.
There is one hole on each side and one on top.
For tight spaces, the D-handle can be temporarily left off the back of the drill.
SPECIFICATIONS
ASSEMBLY
!
