IMPORTANT
It is advisable to put plastic ball valves at the water inlet
(A)
fertilizer injection
(B)
and fertilizer suction
(E)
for the maintenance of the pump.
Fertilizer should not be sucked from de tank bottom to avoid taking up non
dissolute particles.
9
GB
4.ASSEMBLY AND INSTALLATION
The special supports of stainless steel (66230) permit the installation of
the pump on the floor, or a flat surface, or on the wall.
The
FERTIC
pump should always be installed in the position indicated in the
diagram so that the axes of the fertilizer connections are in a vertical position
with the regulation turret above.
The nuts M-6 (66334) necessary for the installation are furnished together with
the supports. In the wall assembly, six nuts are needed, on the floor, eight.
Put two inlets
(A)
and
(B)
in the water network where the pump is going to be
located at a minimum distance of
0.25 m. (0.75 ft)
from each other.
Pressure inlet (C)
Connect the flexible pressure inlet hose
(A)
to the pump
connector
(C)
inserting
the 70 mesh line filter
that is
provided.
Fertilizer injection(F)
From the pump connector
(F)
put the flexible
injection hose at the irrigation network inlet
(B)
inserting
the antisyphon valve
at a minimum of 0.5 m. (1.5 ft)
above the fertilizer level.
Fertilizer suction (E)
Place the
70 mesh filter
Do not suck up the fertilizer
directly from the tank bottom.
Drainage (D)
Connect the free drainage hose to the outside or to the suction of
the irrigation pump.
C
E
D
F
IMPORTANT
It is advisable to put plastic ball valves at the water inlet
(A)
fertilizer injection
(B)
and fertilizer suction
(E)
for the maintenance of the pump.
Fertilizer should not be sucked from de tank bottom to avoid taking up non
dissolute particles.
9
GB
4.ASSEMBLY AND INSTALLATION
The special supports of stainless steel (66230) permit the installation of
the pump on the floor, or a flat surface, or on the wall.
The
FERTIC
pump should always be installed in the position indicated in the
diagram so that the axes of the fertilizer connections are in a vertical position
with the regulation turret above.
The nuts M-6 (66334) necessary for the installation are furnished together with
the supports. In the wall assembly, six nuts are needed, on the floor, eight.
Put two inlets
(A)
and
(B)
in the water network where the pump is going to be
located at a minimum distance of
0.25 m. (0.75 ft)
from each other.
Pressure inlet (C)
Connect the flexible pressure inlet hose
(A)
to the pump
connector
(C)
inserting
the 70 mesh line filter
that is
provided.
Fertilizer injection(F)
From the pump connector
(F)
put the flexible
injection hose at the irrigation network inlet
(B)
inserting
the antisyphon valve
at a minimum of 0.5 m. (1.5 ft)
above the fertilizer level.
Fertilizer suction (E)
Place the
70 mesh filter
Do not suck up the fertilizer
directly from the tank bottom.
Drainage (D)
Connect the free drainage hose to the outside or to the suction of
the irrigation pump.
C
E
D
F
Содержание FERTIC
Страница 1: ...FERTIC E GB F FRANÇAIS ENGLISH ESPAÑOL ...
Страница 23: ......
