®
1. Follow all safety rules, regulations and conditions when using tools, etc.
2. Do not wear watches, rings, bracelets or loose clothing when using air tools.
3. WARNING! Disconnect from air supply before changing accessories or servicing.
4. Keep the tools in good condition and replace any damaged or worn parts. Use genuine parts only. Non-authorized parts
may be dangerous.
5. WARNING! Make sure that correct air pressure is maintained and not exceeded. We recommend 90psi.
6. Keep air hose away from heat, oil and sharp edges. Check air hose for wear before each use and ensure that all
connections are secure.
7. Only use impact sockets / chisels / grinding stones specifically designed for use with an impact wrench / ratchet
wrench / air hammer and die grinder.
Inspect sockets / grinding stones / chisels daily for excessive wear or cracks.
Impact wrench / ratchet wrench sockets and accessories must be used with this tool.
The spring retainer holds the chisel in place, it must be secure before the chisel can operate properly.
Die grinder accessories rated for 10,000 RPM or more.
1. Wear approved safety eye / face shield, ear and hand protection.
2. WARNING! Due to the possible presence of asbestos dust from brake linings, when working around vehicle brake
systems, we recommend you wear suitable respiratory protection.
3. Maintain correct balance and footing. Make sure that the floor is not slippery and wear non-slip shoes.
4. Keep children and non-essential people away from working area.
5. DO NOT use the air tool for a task it is not designed to perform.
6. DO NOT use air tool if damaged.
7. DO NOT use air tool unless you have been instructed on its use by a qualified person.
8. DO NOT lift the air tool by the air hose.
9. DO NOT direct air from the air hose at yourself or others.
10. When not in use disconnect from air supply and store in a safe, dry location.
!
IMPORTANT SAFETY INSTRUCTIONS
!
IMPORTANT
!
WARNING
