Italiana Camini LAYMA IDRO 18, Инструкция по установке, эксплуатации и обслуживанию

Страница: 23 / 36

23
ENGLISH
UseR instRUctions
FIRST IGNITION (COMMISSIONING) PHASES
• Make sure you have read and understood this
manual.
• Remove all flammable materials from the appliance
(manuals, labels, etc.). In particular remove any
labels from the glass.
• Make sure the technician has carried out first
ignition for the product, and also filled the pellet
reservoir for the first time. See the “load Screw
feeder” function in the “User instructions” section.
loaDing tHe Pellets into tHe Pellet
tanK
To access the reservoir, open the cover using the
handle*
When the stove is hot, DO NOT REST the
bag of pellets on the upper grille.
Use the provided gloves when loading the
stove while it is operating and hence hot to
the touch.
Take care not to touch the fume exhaust
pipe when hot.
FUEL
Use UNI EN ISO 17225-2 category A1 wood pellets
or similar regulatory products with the following
characteristics.
diameter 6 mm;
length 3-4 cm;
humidity <10%
For reasons of safety and protecting the environment,
DO NOT burn plastic, painted wood, coal, bark or
other such materials in the stove.
Do not use the stove as an incinerator.
Caution
Using fuels other than those specified can
damage the appliance.
On first ignition, there may be a slight
smell of paint, which will disappear in a
short time.
vent
During normal operation the stove is
vented automatically. The need for manual
venting can only be assessed at initial
start-up by the technician.
UseR/installeR
®
*