background image

Via Europa, 35 - 20010 Pogliano Milanese (MI) - Tel. 02/9396161  r.a. -  Fax 02/93549494

Via del Mare 32/A (interno D) - 00040 Pomezia (Roma) - Tel. 06/9100417 - Fax 06/9100430

DIBIPACK 6084

F

GB

D

E

31

UTILISATION NON CONSENTIE

L’utilisation de la machine pour
des manoeuvres non permises et
son utilisation impropre ainsi que
la carence d’entretien peuvent
entraîner des situations de
danger pour le personnel outre à
porter préjudice à la fonctionnalité
et à la sécurité intrinsèque de la
machine.
Les actions décrites ci-
dessous qui naturellement ne
peuvent pas couvrir tout
l’ensemble des possibilités
potentielles  «d’utilisation
impropre» de la machine
constituent celles qui sont les
plus 

«raisonnablement»

prévisibles et sont à considérer
absolument interdites, donc :

NE JAMAIS permettre l’utilisation
de la machine à un personnel qui
ne soit pas préparé physiquement
et psychiquement ou qui n’ait pas
lu attentivement tout ce que
contenu dans cette publication.
NE JAMAIS employer la machine
en des conditions d’ambiance
non prévues.
NE JAMAIS employer la machine
avec des raccordements
électriques de type «volant» en
utilisant des câbles ou des
rallonges provisoires ou non
isolés.
NE JAMAIS laisser la machine
sans surveillance lorsqu’elle a été
autorisée au fonctionnement.
NE JAMAIS utiliser la machine
pour un service différent de celui
auquel elle est destinée.
NE JAMAIS modifier les compo-
sants de la machine pour en
augmenter la productivité.
NE JAMAIS utiliser la machine en
portant des vêtements amples ou
avec manches ouvertes.
NE JAMAIS employer la machine
si l’on n’a pas compris à fond le
contenu de cette publication.
NE JAMAIS effectuer d’interven-
tions de nettoyage ou d’entretien
extraordinaire sans avoir au
préalable désactivé la machine
en débranchant la prise
d’alimentation  électrique.
NE JAMAIS exécuter des ré-
parations provisoires ou de
fortune; interpeller le service
d’assistance.
NE JAMAIS utiliser la machine
comme surface d’appui et n’y
appuyer aucun objet qui soit
étranger aux opérations de
conditionnement normales.
NE JAMAIS toucher la barre
soudante  à  l’ouverture de la
cloche après une opération de
conditionnement.
NE JAMAIS effectuer d’opéra-
tions de conditionnement avec
l’élément de soudure cassé; le
substituer immédiatement.

PROHIBITED USES

Using the machine for operations
that are not permitted, its
improper use and lack of
maintenance may cause
dangerous situations for personal
safety as well as jeopardize the
intrinsic functionality and safety
of the machine.

The actions described below,
which cannot obviously cover
the entire range of potential
“improper uses” of the
machine, constitute those most
“reasonably” foreseeable and
are strictly prohibited,
therefore:

NEVER permit operation of the
machine by psychophysically
unfit people or those who have
not carefully read the contents of
this manual.
NEVER use the machine in
unsuitable environmental
conditions.
NEVER  use the machine with
“mobile” type electrical
connections using temporary or
non-insulated cables or extension
leads.
NEVER leave the machine
unattended when it has been
enabled for operation.
NEVER use the machine for
purposes other than those for
which it is designed.
NEVER modify the components
of the machine with the aim of
increasing productivity.
NEVER  use the machine whilst
wearing flowing or wide-sleeved
garments.
NEVER use the machine if the
contents of this manual have not
been fully understood.
NEVER carry out cleaning or
extraordinary maintenance
operations without having first
deactivated the machine and
removed the plug from the power
socket.
NEVER carry out temporary or
emergency repairs: call the
service centre.
NEVER  use the machine as a
resting surface and do not place
any object on it that is not used
for normal packaging operations.
NEVER touch the sealing bar
when opening the hood after a
packaging operation.
NEVER carry out packaging
operations with a broken sealing
element: replace it immediately.

UNERLAUBTER GEBRAUCH

Die Verwendung der Maschine für
unerlaubte Tätigkeiten sowie der
unsachgemäße Einsatz und eine
mangelhafte Wartung können zu
Gefahrensituationen für die
Unversehrtheit von Personen
führen und die Betriebsfähigkeit
und Sicherheit der Maschine
selbst beeinträchtigen.
Die im Folgenden beschrie-
benen Tätigkeiten, die
selbstverständlich nicht alle
potentiellen Möglichkeiten des
‚unsachgemäßen Gebrauchs’
der Maschine umfassen, sind
jene Tätigkeiten, die
‚ v e r n ü n f t i g e r w e i s e ’
vorhersehbar und absolut
verboten sind:

NIEMALS darf die Verwendung
der Maschine Personal anvertraut
werden, das psycho-physisch
ungeeignet ist oder den Inhalt
dieses Handbuchs nicht
aufmerksam durchgelesen hat.
NIEMALS darf die Maschine
unter nicht vorgesehenen
U m g e b u n g s b e d i n g u n g e n
eingesetzt werden.
NIEMALS darf die Maschine
unbeaufsichtigt gelassen werden,
wenn sie für den Betrieb aktiviert
wurde.
NIEMALS darf die Maschine für
Zwecke verwendet werden, für
die sie nicht vorgesehen ist.
NIEMALS 

dürfen die

M a s c h i n e n k o m p o n e n t e n
modifiziert werden, um die
Produktivität zu steigern.
NIEMALS darf die Maschine mit
loser Kleidung oder offenen
Hemdsärmeln bedient werden.
NIEMALS darf die Maschine
eingesetzt werden, wenn der
Inhalt dieses Handbuchs nicht
vollständig verstanden wurde.
NIEMALS 

dürfen ausser-

ordentliche Reinigungs- oder
Wartungstätigkeiten durchgeführt
werden, bevor die Maschine nicht
ausgeschaltet und der Stecker
abgezogen wurde.
NIEMALS  dürfen provisorische
oder behelfsmäßige Reparaturen
durchgeführt werden; wenden Sie
sich an den Kundendienst.
NIEMALS darf die Maschine als
Ablagefläche verwendet werden;
es dürfen nur die zu
verpackenden Gegenstände auf
der Maschine aufgelegt werden.
NIEMALS darf die Schweissleiste
beim Öffnen der Kunststoffhaube
nach einem Verpackungsvorgang
berührt werden.
NIEMALS darf ein Verpack-
ungsvorgang mit gebrochenem
Schweisselement durchgeführt
werden; es muss unverzüglich
ersetzt werden.

USO NO PERMITIDO

La utilización de la máquina para
maniobras no permitidas, el uso
impropio y la falta de
mantenimiento pueden causar
situaciones de peligro para la
incolumidad seguridad personal
además de perjudicar la
funcionalidad y la seguridad de
la máquina.
Las acciones indicadas abajo
que obviamente no puede
cubrir el entero abanico de
potenciales posibilidades de
“uso impropio” de la misma,
representan las “razona-
blemente”  más previsibles y
tienen que considerarse
absolutamente prohibidas, por
tanto:

NUNCA permitir el uso de la
máquina a personal en
condiciones psicofísicas
inadecuadas o que no haya leído
con atención lo contenido en esta
publicación.
NUNCA utilizar la máquina en
condiciones ambientales no
previstas.
NUNCA utilizar la máquina con
conexiones eléctricas de tipo
“volante” por medio de cables o
alargaderas provisionales o no
aisladas.
NUNCA dejar la máquina
abandonada cuando se ha
habilitado para la actividad
operativa.
NUNCA utilizar la máquina para
un servicio diferente del suyo
proprio.
NUNCA modificar los
componentes de la máquina para
aumentar la productividad.
NUNCA utilizar la máquina
llevando prendas volantes o con
mangas abiertas.
NUNCA utilizar la máquina si no
se ha comprendido a fondo el
contenido de esta publicación.
NUNCA efectuar intervenciones
de limpieza o mantenimiento
extraordinario sin haber
desactivado la máquina sacando
también el enchufe de la toma de
alimentación eléctrica.
NUNCA efectuar arreglos
provisionales o de fortuna; llamar
al servicio de asistencia.
NUNCA utilizar la máquina como
superficie de apoyo y no apoyar
ningún objeto extraño a las
normales operaciones de
empaquetamiento.
NUNCA tocar la barra soldadora
al abrir la campana tras una
operación de empaquetamiento.
NUNCA efectuar operaciones de
empaquetamiento con el
elemento de soldadura roto:
sustituir rápidamente.

Содержание DIBIPACK 6084

































































Отзывы: