it ITVS-760B, Инструкция по эксплуатации

Страница: 6 / 27

Rear View
6
A. AUX IN jacks
For audio sources with RCA jacks, plug the RCA end of the cable into these jacks and the
other into the audio source. Be sure to connect the white plug to the white jack (Left) and the red
plug to the red jack (Right).
B. FM wire antenna
While tuned to a station in FM mode, extend the wire and reposition to adjust for best reception.
C. AC Power Cord
Plugs into a wall outlet.
A. Turntable.
B. Safety Screw (for transport)
Before using the unit, turn the screw
clockwise using a coin or screwdriver.
Important: When you transport the unit, turn the screw counterclockwise to secure the turntable.
The silver screw on the back of the turntable is a balancer for both the turntable as well as for
the tone arm.
Please turn this screw with a coin to either left or right and test by moving your tone arm to the
middle of the spindle. Please note that this screw is a balancer and will have to be adjusted until
the tone arm moves freely to the end of the record (middle of the spindle). The Tone Arm should
move without any resistance before using the turntable phonograph.
C. Speed Selector.
D. Tone Arm holder.
E. Tone Arm. (Before use, completely loosen the fixed plastic tie on the tone arm and uplift tone arm.)
F. 45 RPM adaptor.
Parts of the Turntable