9
winIDEA
TM
settings
This section describes winIDEA settings distinct to the Infineon DAP Active Probe.
Hardware selection
The iC5700 can connect to and control target Aurix devices either through its DTM module and
belonging DAP cable adapter (JTAG and DAP debug interface supported, limited maximum DAP
frequency, DAPE debug port not supported) or through the Infineon DAP Active Probe (DAP
and DAPE debug interface supported including max. DAP/DAPE frequency) connecting to the
iC5700 FNET port.
Associated debug hardware is selected in the Hardware/Emulation Options/Probe tab. Select
‘Active Probe’ when using the Infineon DAP Active Probe.
Debug interface voltage levels
Debug interface voltage levels are configured in the Hardware/Emulation Options/Hardware
tab.
