background image

 

5-4. Binding

 

 

To make SGZB11C work with the devices which support IAS ZONE/ On/Off/ Temperature 

measurement, users need to bind the two devices:

 

 

Step1. Enable the binding feature of SGZB11C.

 

 

Press the Binding Key 

once → to broadcast the binding request for IAS ZONE

 

 

Press the Binding Key 

twice within 5 seconds → to broadcast the binding request for On/Off 

Press the Binding Key 

3 times within 5 seconds → to broadcast the binding request for 

Temperature measurement

 

The indicator flashes 

green

 while the Binding Key is pressed.

 

 

Step2. Enable the binding feature of the IAS ZONE/ On/Off/ Temperature measurement devices.

 

 

Step3. The indicator flashes 

green

 5 times after the binding is completed; otherwise, it flashes 

green

 

10 times.

 

 

 

5-5. Sleeping Mode

 

 

SGZB11C is designed to go to sleeping mode for power-saving in some situations:

 

 

A.

 

While the device is in the network → the

  sleeping period is 5 minutes; it will wake up 

every 5 minutes to keep online. 

B.

 

When it doesn’t find a network to join → 

SGZB11C will go to sleeping mode. It will wake up 

every 15 minutes to search a network to join. 

C.

 

Once SGZB11C was joined to a network and by any chance the network is no longer existed 

or the device is out of the network → 

SGZB11C will wake up every 15 minutes to find the 

network it joined before. 

 

It never keeps in sleeping mode and continues to find out a network every 15 minutes. This condition 

would consume up to 30 times power spending compared to normal-operating status. To prevent this 

unwanted power consumption, we recommend that users remove the batteries to power off the device.

 

 
 

 

5-6. Wake up SGZB11C

 

 

When users would like to setup or acquire data from the device which is in sleeping mode, we have to 

wake up the device as the following steps:

 

 

Step1. Press the Auxiliary Key.

 

 

Step2. The indicator flashes 

green

 5 times when SGZB11C is online.

 

 

Step3. SGZB11C will broadcast the device data to the ZigBee network.

 

 

 

9

 

Содержание SGZB11C














Отзывы: