5. Setting up SGZB11C
5-1. Turn On/Turn Off SGZB11C
Under the circumstances SGZB11C is first time used or after resetting, when it is powered on and
cannot successfully search a network, SGZB11C will go into
turn-off mode
.
To manually turn on or turn off SGZB11C, please use the following instructions:
A.
Turn it on: Press the Binding Key once. The indicators will flash once, and the device is ready
to be used.
B.
Turn it off: Press and hold the Binding Key for 15 seconds. The indicator will keep flashing.
Release the Binding Key, and the device would be turned off.
It is recommended that having a 5-second interval between turning on and turning off SGZB11C to
avoid the interruption between inductors and capacitors or so.
5-2. Join the ZigBee Network
After SGZB11C is turned on, it will search for an existing ZigBee network and send a request to join the
network automatically. While SGZB11C is under the coverage from a coordinator or a router whose
permit-join feature is enabled, SGZB11C will be permitted to join the network.
Step1. Enable the permit-join function (valid for 60 seconds) of a coordinator or a router (please
refer to the user manual of the coordinator or the router to enable the permit-join feature).
Step2. Turn on SGZB11C. It will start to search and join the network.
Step3. The indicator will flash
green
once when it finds out a network to join.
Step4. The indicator will flash
green
5 times after it is joined successfully. Otherwise, the indicator
will not flash.
5.3. Enroll in the ZigBee Security System
SGZB11C is a Zone device in the ZigBee security system. Right after SGZB11C join the ZigBee network, it
will automatically find out a CIE (Control and Indicating Equipment) device (i.e. ISysmart Z201B) and send
a registration request to the CIE device to enroll in the security system. The enrollment has these 3
situations:
A.
There is no CIE device or no compatible CIE device in the network → the indicator flashes
green
twice.
B.
There is a compatible CIE device in the network, but it is failed to enroll → the indicator flashes
green
4 times.
C.
The enrollment is completed → the indicator flashes
green
6 times.
NOTE: Users had better NOT enroll multiple Zone devices at the same time to prevent registration failure.
