iSymphony V1BLUE, Руководство пользователя

Страница: 11 / 89

0 1
The indicator appears in the display and the selected
track will be repeated continuously.
Repeat Playback
(On Remote Control Only)
One Track Repeat
Select the track to be repeated and begin playback.
Press the
REPEAT
button on remote control once.
All Tracks Repeat
Press the REPEAT button on the remote control twice.
Random Playback (On Remote Control Only)
The Random playback feature allows you play all the tracks on the disc in random order. You can select
random playback while the disc is playing or when the player is stopped.
Load a CD in the player as usual and then press the
RANDOM
button on the remote control handset.
To stop Random playback, press the RANDOM button on the remote control again.
The “RNDM” indicator disappears and normal playback will resume from that point.
To cancel Repeat playback mode press the REPEAT button until the ALL indicators disappear from
the display.
Repeat mode can also be canceled by opening the CD tray, switching to the TUNER or AUX mode, or
pressing the STANDBY /
INTRO Scan Play back
This feature allows you to play just the first 10 seconds of each track on the disc. This may be useful when
you are trying to locate a specific song but you do not remember the track number
Load the disc as usual and wait until the display shows the total playing time and number of tracks.
Press the MENU/INTRO button on the remote control
The player will play the first 10 seconds of each track automatically.
When the first 10 seconds of the last track has played the player
stops and the display again shows the total playing time and
number of tracks on the disc.
The “INTRO” indicator will appear in the display.
To cancel the Intro mode press the MENU/INTRO button once more until the “INTRO” indicator
disappears.
Programmed Playback
Note: You cannot program tracks during playback. If a disc is playing, press the STOP/BAND button
first to stop playback before beginning the programming steps below.
1. Load the disc in the player and wait until the player has read
the Table of Contents of the disc.
2. Press the PROG/CLK button on the remote control.
The
“PRG”
indicator, Program Memory
“P- 01”
and Track
“00” will appear in the display .
3. Then press the SKIP/TUNING or buttons to
select the first track on the disc to be programmed.
Example: Track 07
4. Press the
PROG/CLK
button again to enter Track 07 in
program memory #1. The program memory number
advances to
“P- 02”
5.
The Programmed Playback feature allows you to program a total of up to 64 tracks in any desired order.
You may program the same track to play several times within a program sequence if desired.
Repeat steps 3 and 4 selecting the desired track number each time until you have entered up to 64
tracks in the CD program memory.
The Repeat function allows you to continuously repeat a single track, or the entire disc. The Repeat function
can be activated during playback or while the player is stopped.
Load the disc into the player and begin playback.
The ALL indicator appears on the display. All tracks on
the disc will be repeated continuously.
button.
The “ RNDM ” indicator appears on the display.
The player will randomly select a track from the disc and
begin playback. Random playback will continue until all
tracks have played once and then the player stops.
(On Remote Control Only)
(On Remote Control Only)