iSymphony V1BLUE, Руководство пользователя

Страница: 7 / 89

1 1
REMOTE CONTROL OPERATING INSTRUCTIONS
Make sure that you have fully extended the FM antenna wire and connected the AM
antenna.
Make sure that you have installed batteries in the remote control handset.
Make sure that the system is connected to an AC outlet that is always powered.
Do not connect the system to an AC outlet controlled by a wall switch.
General Controls
1. STANDBY/ Button
2. EQUALIZER Button
3. REPEAT Button
4. PRESET/ALBUM/MENU +/- Button
5. SKIP Button
6. STOP/BAND Button
7. MUTE Button
8. FUNCTION/REJECT Button
9. TIMER Button
10. ST/MONO Button
11. SLEEP Button
12. DBBS Bass Boost Button
13. PROG/CLK Button
14. RANDOM Button
15. MENU/INTRO Button
16. SKIP Button
17. SELECT ID3 / BIT RATE Button
18. RECORD Button
19. PLAY/PAUSE Button
20. Button
21. VOLUME - Button
22. ANSWER / PAIRING Button
10
9
1
2
3
4
5
6
7
8
11
12
13
14
15
16
17
18
19
20
21
22
Most of the main functions of this system can be operated by the controls on the front panel of the main
unit, or by the buttons on the remote control handset. If a specific function can only be operated by the
remote handset, or by the front panel controls, this will be clearly indicated in the instructions.
When operating this system with the remote control handset make sure that the IR (Infrared) transmitter
on the front of the remote handset is pointed at the remote sensor on the front panel of the main unit.
The effective operating range of the remote control is approximately 15 feet. Please note that bright
sunlight or room lighting may interfere with the remote control operation. If the remote is not operating
properly try reducing the brightness of the room or moving closer to the main unit. If this does not solve
the problem, it may be time to change the remote control batteries.